Gelco Chimney Cleaning Service Nationwide

Why Puyallup Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco repair in Puyallup, chimney cleaning, and installation service throughout the South Hill corridor. Our technicians work on Gelco stainless liners, multi-flue caps, and top-mount dampers daily, and every job starts with a camera-scan inspection and a written price before any work begins. Call (253) 323-5667 to schedule.

Call (253) 323-5667

Gelco has been a steady name in chimney components for decades, particularly their stainless steel liner kits and multi-flue caps that show up in Puyallup homes from the 1980s through today. We’re not authorized by Gelco, and we don’t need to be. As an independent service provider, we source OEM Gelco parts when a customer wants factory-original fit, and we stock quality aftermarket alternatives that meet the same specifications when they make better sense for the repair. Corrine Halstead, our owner, learned the trade at BOCES Westchester and has worked the South Hill corridor long enough to know that a Gelco liner installed in a 1987 rambler is aging differently than one in a historic Meeker Street Victorian with foundation settlement issues, which is why we also offer Gelco Chimney Cleaning in South Hill, WA.

Puyallup’s wet climate is hard on metal chimney components. The valley traps damp air, and those 40-plus inches of annual rainfall work on stainless steel over time, especially where creosote acids collect in corrugated liner valleys. We’ve cleaned and repaired enough Gelco systems in Puyallup to know where they fail and why, and we also handle Gelco repair in Sumner.

Why Trust Level Two Chimney Puyallup for Your Gelco Chimney Cleaning?

Our technicians carry Gelco-compatible parts on the van, which means most repairs don’t require a second trip. We stock stainless liner bands, multi-flue cap hardware, and top-mount damper gaskets specifically sized for Gelco’s common 6″ and 8″ liner kits. When we find a failed component, we can usually fix it that visit.

The Haven Standard governs how we work. Clause 4 requires a documented photo record on every job, and we’ve done that since 2009. For Gelco service, that means the customer sees exactly what the camera found: the pinhole in the corrugated liner, the rusted rivet on the cap, the shifted insulation wrap. Then we write down the price. Then we start the work. Camera goes in first. Price gets written down second. Work starts third.

We’re independently owned and operated, not a franchise. Corrine Halstead runs the business, and the license number is displayed on every page. Our techs are background-checked and uniformed, and you’ll get a text when yours is on the way. If you bring us a competitor’s written estimate for Gelco work, we’ll give you a free second opinion.

Since 2009, we’ve completed more than 38,000 chimney inspections and cleanings. Every one had a written price before work started and a documented record when it was done. That includes thousands of Gelco systems in Pierce County.

Common Gelco Chimney Cleaning Problems We Fix in Puyallup

• Pinhole corrosion in corrugated stainless liners. Gelco’s corrugated liner kits, common in 6″ and 8″ sizes, develop microscopic pitting where creosote acids pool in the valleys between corrugations. Puyallup’s wet winters accelerate this. The damage starts invisible and progresses to pinholes that leak combustion gases. We catch it with the camera during routine cleaning, before it becomes a breach.
• Joint separation in liner kits. Gelco liner sections connect with overlapping joints secured by bands. In Puyallup’s older homes near Pioneer Park, foundation settling from alluvial soil movement can rack the chimney slightly off-plumb. That stress opens liner joints inside the shaft, creating bypass points for carbon monoxide that are invisible from the firebox. We map these with the camera and re-band or replace sections as needed.
• Top-mount damper gasket and hinge corrosion. Gelco’s cast-aluminum top-mount dampers seal with a silicone gasket that hardens and cracks after years of freeze-thaw cycling. The hinge pin rusts in Puyallup’s damp air. Result: the damper won’t seal fully, you lose conditioned air up the flue, and rainwater gets in. We replace gaskets, free seized hinges, or swap the whole damper if the casting is cracked.
• Multi-flue cap rivet failure. Gelco multi-flue caps in stainless or copper use riveted seams at the corners and mesh base. Those rivets corrode from the inside out in our climate. The cap loosens, rattles in wind, and eventually shifts enough to let squirrels in or dump rust-streaked runoff onto the crown. We re-rivet with stainless hardware or replace the cap if the mesh is compromised.
• Insulation wrap degradation and shifting. Gelco liner kits include a ceramic blanket insulation wrap that maintains flue gas temperature and reduces creosote buildup. Over years, the wrap can compress, tear, or slide down the liner, especially if the original installation left gaps at joints. Creosote then accumulates in the cold space behind the liner, creating a hidden fire hazard. We remove the liner, clean the cavity, and reinstall with proper support and insulation.

Before

After

Gelco Parts & Our Repair-vs-Replace Approach

We stock quality aftermarket components that meet or exceed original Gelco specifications for most repairs, and we source OEM Gelco parts when a customer prefers factory-original fit. Our buying network through Haven keeps prices honest on both.

For a Gelco top-mount damper with a failed gasket, we’ll usually replace the gasket and service the hinge. That’s a repair. If the casting is cracked or the frame is warped from heat, we recommend replacement. Same with multi-flue caps: re-riveting makes sense if the mesh and lid are sound. If rust has eaten through the corners, a new cap is the better long-term investment.

We recently serviced a Gelco stainless liner in a Puyallup home where the homeowner reported a smoky smell on damp days. Our tech found that the corrugated liner had separated at a joint, allowing creosote to seep behind the insulation wrap, and the Gelco cap’s rivets had rusted through. We removed the creosote, secured the liner joint with a stainless band, and installed a new multi-flue cap, restoring proper draft and stopping the odor.

Nothing gets replaced without camera evidence you can see, and we’ll tell you plainly when work can safely wait. Call (253) 323-5667 for a written estimate.

Our Gelco Service Process - Step by Step

1. 1
   Diagnosis with camera scan. We run the chimney camera down the full flue length, inspecting the Gelco liner for corrosion, joint integrity, and insulation condition. We photograph the cap, crown, and damper from top and bottom. You get the photo record under Haven Standard Clause 4.
2. 2
   Written price and scope. We deliver a written price, written scope, and written warranty before any work starts. Clause 1 of the Haven Standard. For Gelco systems, this specifies OEM or aftermarket parts, labor, and timeline.
3. 3
   Repair or installation. Our tech performs the agreed work: creosote removal, cap replacement, liner repair, or chimney waterproofing. Background-checked, uniformed, with license number on the page. You get a text when we’re on the way.
4. 4
   Post-work testing and documentation. We run the camera again to verify the repair, test damper operation, and confirm proper draft. The final photo record goes to you with the invoice.
5. 5
   Warranty coverage. Every Gelco job is backed by our 365-Day Done Right Promise. If it’s not done right, we make it right.

Gelco Products We Service & Install in Puyallup

We work on Gelco Stainless Steel Liner Kits in 6″ and 8″ diameters, both corrugated and smooth-wall configurations. We service and replace Gelco Multi-Flue Caps in stainless steel and copper, including models with spark arrestor mesh. We repair and replace Gelco Top-Mount Dampers, including gasket and hinge service. We also install Gelco Chimney Caps and Spark Arrestors as standalone upgrades.

Our vans carry common Gelco hardware for same-day repair: liner bands, insulation support, cap fasteners, and damper gaskets. For less common sizes or specialty finishes, we source through our Haven network with fast turnaround.

We Also Service These Brands

We’re not single-brand dependent. Our technicians also work with DuraFlex liner systems, HeatShield cerfractory flue sealant, Olympia Chimney components, Famco venting products, and Copperfield chimney supplies. Multi-brand capability means we recommend what’s right for your chimney, not what we happen to sell.

FAQs - Gelco Chimney Cleaning Service in Puyallup

Is Level Two Chimney Puyallup authorized by Gelco?

No. We are an independent service provider with no manufacturer authorization or partnership. We service Gelco products based on hands-on experience and technical knowledge, sourcing OEM parts when requested and quality aftermarket alternatives when appropriate.

My Gelco chimney cap is rattling and leaving rust stains on the crown. Can it be repaired or does it need replacement?

Rattling and rust streaks usually mean corroded rivets or a shifted cap base. We can often re-secure with stainless hardware if the mesh and lid are structurally sound. If corrosion has eaten through the corners or the mesh is torn, replacement is the better choice. Call (253) 323-5667 and we’ll camera-inspect to give you a definite answer.

How often should a Gelco stainless liner be cleaned in Puyallup’s climate?

Annual our Chimney Cleaning & Sweep services are the standard for Gelco stainless liners in Puyallup, where extended burning seasons and wet conditions accelerate creosote accumulation. If you burn partially seasoned wood from local foothill sources, inspect twice yearly. The camera will show whether Class III glazed creosote is forming. Call (253) 323-5667 to schedule before burning season starts.

What causes a Gelco top-mount damper to seize, and can it be fixed?

The silicone gasket hardens and the hinge pin corrodes from Puyallup’s freeze-thaw cycles and damp air. We can usually free the hinge and replace the gasket. If the cast-aluminum body is cracked, replacement is necessary. We stock both repair parts and complete dampers.

Is waterproofing necessary for a Gelco chimney with a stainless liner?

Yes. The liner protects the flue, but the masonry crown and exterior joints still absorb water. Puyallup’s 40-plus inches of annual rainfall and trapped valley moisture promote spalling and freeze-thaw damage. We apply crown sealant and breathable masonry waterproofing as standard on Gelco jobs where the exterior needs it.

Can you replace just the damaged section of a Gelco liner, or do we need a full reline?

Often a section replacement is possible. We camera-inspect to locate the damage, then remove and replace the failed section with a compatible stainless segment, properly banded and insulated. If corrosion is widespread or multiple joints have failed, we recommend full replacement. You’ll see the camera evidence before we quote either option. Call (253) 323-5667 for a free estimate.

Book Your Gelco Service in Puyallup, WA

Call (253) 323-5667 to schedule Gelco chimney cleaning, repair, or installation in Puyallup. A live person answers 24 hours a day. We’ll send a background-checked, uniformed tech with a camera, deliver a written price before any work starts, and leave you with a documented photo record and a 365-Day Done Right Promise.

Written by Corrine Halstead, Owner at Level Two Chimney Puyallup, serving Puyallup since 2009.