Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Auburn, WA
Auburn chimney cleaning runs $180-$340 for a standard sweep with NFPA 211 Level 2 camera inspection, and most jobs on West Hill or Lea Hill can be scheduled within a few days. Because Auburn’s Green River Valley location traps moisture against masonry for months, we find heavy glazed creosote and crown deterioration far more often here than in drier foothill cities. Call (253) 323-5667 for a written estimate before any work starts.
Level Two Chimney Co. has completed more than 38,000 chimney inspections and cleanings since 2009, every one with a documented photo record under Haven Standard Clause 4. Our crews serving Auburn are dispatched from the brand’s Seattle office and carry materials from Gelco, Olympia Chimney, and Famco.
Why Auburn Homes Are Different
Auburn sits on the floor of the Green River Valley, making it persistently foggier and wetter than neighboring higher-elevation cities like Kent or Federal Way. That trapped valley moisture saturates masonry chimneys for months at a time, accelerating crown cracking, mortar erosion, and flashing failure at a rate uncommon elsewhere in the metro. Combined with a 7-month heating season and a local culture of burning wood that is often stored outdoors and under-seasoned due to constant rainfall, Auburn chimneys accumulate heavy, glazed creosote far faster than the same fireplace would in a drier climate.
The housing stock tells the rest of the story. Homes on West Hill and Lea Hill, built from the late 1960s through the 1990s, commonly have standard masonry fireplaces or factory-built metal-insert chimneys now approaching or past their rated service life. Older blocks near downtown Auburn contain pre-WWII brick chimneys whose mortar joints have endured decades of Green River Valley moisture and frequently need repointing before cleaning can even be completed safely. During rare hard freezes, water trapped in deteriorated crowns expands and fractures masonry that might otherwise last decades longer inland.
Our Main Auburn Services
Most Auburn homeowners call us for chimney cleaning and repair work shaped by the valley’s wet climate and aging housing stock.
Chimney Cleaning & Sweep in Auburn
We sweep Auburn flues with rotary brushes and chemical pre-treatment when glazed creosote is present, which is common here due to under-seasoned wood. Every visit includes a camera-scan inspection down the full flue length and a documented photo record under Haven Standard Clause 4. Chimney Cleaning & Sweep in Auburn covers single-fireplace homes on Lea Hill to multi-flue properties in downtown’s older blocks.
Chimney Repair in Auburn
Auburn repairs focus on moisture damage: crown cracks, spalling brick from freeze-thaw cycles, and flashing failures where the Green River Valley fog sits against masonry for months. We repoint mortar, rebuild crowns, and replace damaged components with materials sourced through Haven’s buying network. Chimney Repair in Auburn starts with a camera inspection and written scope before any work begins.
Fireplace Services in Auburn
Factory-built inserts in 1970s-1990s West Hill homes often need firebox panel replacement, damper repair, or gas-conversion evaluation after years of wet-climate operation. We inspect the smoke chamber, check clearances to combustibles, and document everything with photos. Fireplace Services in Auburn includes a written price and warranty before work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Auburn
Auburn’s persistent valley moisture makes chimney cap and crown work our most frequent repair category here. The combination of saturated marine air from October through May and periodic hard freezes destroys crowns that might last twenty years in drier climates. We install and repair caps and crowns with materials from Gelco, Olympia Chimney, and Copperfield, and every job includes a written price before work starts under Haven Standard Clause 1. Chimney Cap & Crown work in Auburn typically follows our camera inspection, which reveals hidden crown damage not visible from the ground.
Crown Repair
Signs you need it
Water pooling on the firebox floor after rain, visible cracks or missing chunks in the crown concrete, or pieces of mortar on the roof below the chimney.
What it costs in Auburn
Crown repair in Auburn typically runs $350-$850 depending on crack depth and whether the crown is poured concrete or precast.
How we do it
We grind out cracked material, apply a bonding agent, and pour new crown mix sloped to shed water, then document the repair with photos under Haven Standard Clause 4.
Crown Coating
Signs you need it
Hairline cracks across the crown surface with no structural spalling yet, or minor water staining on interior bricks that suggests early moisture intrusion.
What it costs in Auburn
Crown coating in Auburn typically runs $250-$550 for surface preparation and flexible membrane application.
How we do it
We clean and prime the crown, then brush or spray a flexible elastomeric coating rated for freeze-thaw cycling, with photos before and after.
What Chimney Cap & Crown Costs in Auburn
| Item | Typical range in Auburn |
|---|---|
| Crown repair | $350-$850 |
| Crown coating | $250-$550 |
| Cap installation (single flue) | $200-$450 |
How long does a crown repair last in Auburn’s wet climate?
A properly poured crown with correct slope and overhang lasts 15-20 years even in Auburn, but coatings need refresh every 5-8 years due to valley moisture exposure. We note the expected service life on your written warranty.
Can you match my existing cap if only one flue needs coverage?
Yes, we source single-flue and multi-flue caps from Gelco and Olympia Chimney in standard and custom sizes, and we measure on-site before ordering to ensure proper clearance and mesh spec.
Chimney Liner & Rebuild in Auburn
Auburn’s 1960s-1990s housing stock was built with clay tile liners now reaching end of life, and the valley’s moisture accelerates liner deterioration from the outside in. Factory-built metal chimneys in West Hill subdivisions also fail as wall thickness degrades from condensation cycling. We install stainless steel and flexible liners with materials from DuraFlex and HeatShield, and every liner job includes a written scope, written price, and photo documentation. Chimney Liner & Rebuild work in Auburn always starts with our NFPA 211 Level 2 camera inspection to map damage before we quote.
Stainless Steel Liner
Signs you need it
Cracked or missing clay tiles visible on camera scan, smoke leaking into wall cavities, or a home sale inspection flagging an unlined or damaged flue.
What it costs in Auburn
Stainless steel liner installation in Auburn typically runs $2,200-$4,500 depending on flue length, diameter, and whether multiple appliances need connection.
How we do it
We measure the flue with a video scan, drop a continuous corrugated 316Ti stainless liner, insulate with poured mix or blanket, and seal the top with a custom collar and cap.
Partial Rebuild
Signs you need it
Spalled brick above the roofline with compromised structural integrity, a leaning chimney stack, or extensive mortar loss that makes liner installation unsafe without support restoration.
What it costs in Auburn
Partial rebuild in Auburn typically runs $1,800-$4,000 for rebuilding above the roofline with matching brick and new crown.
How we do it
We scaffold the work area, remove damaged courses to sound masonry, lay matching brick with Type N or Type S mortar as appropriate, and pour a new sloped crown before capping.
What Chimney Liner & Rebuild Costs in Auburn
| Item | Typical range in Auburn |
|---|---|
| Stainless steel liner | $2,200-$4,500 |
| Partial rebuild | $1,800-$4,000 |
| Full chimney rebuild | $4,500-$12,000 |
Do I need a new liner or just a repair?
Clay tile cracks or gaps between tiles require full liner replacement; minor mortar joint gaps in an otherwise sound flue may qualify for HeatShield resurfacing, which we evaluate with camera evidence you can see. Call (253) 323-5667 for an exact quote - estimates are free.
How long does a stainless steel liner last?
316Ti stainless steel liners carry a lifetime warranty when properly installed and maintained with annual sweeping; we register the warranty and include a copy with your photo record.
Brands We Service in Auburn
We stock caps, liners, and repair materials from Gelco, Olympia Chimney, Famco, and Copperfield through Haven’s buying network, with most parts available for Auburn jobs within 24-48 hours. Our brands are selected to keep customer prices honest without sacrificing spec.
Pricing for Chimney Cleaning in Auburn, WA
| Service | Typical range in Auburn |
|---|---|
| Standard chimney sweep with Level 2 inspection | $180-$340 |
| Glazed creosote removal (chemical pre-treatment) | $120-$280 |
| Fireplace insert cleaning | $150-$275 |
| Multi-flue sweep (2+ flues) | $280-$450 |
| Crown repair | $350-$850 |
| Crown coating | $250-$550 |
| Cap installation (single flue) | $200-$450 |
| Stainless steel liner | $2,200-$4,500 |
| Partial rebuild | $1,800-$4,000 |
| Full chimney rebuild | $4,500-$12,000 |
Prices in Auburn run toward the higher end when glazed creosote requires chemical pre-treatment or when moisture damage has progressed to spalling brick requiring repointing before cleaning. Every job gets a written price, written scope, and written warranty before work starts under Haven Standard Clause 1 - never a verbal estimate that changes once we’re on site.
Neighborhoods We Serve in Auburn
We sweep and repair chimneys across Auburn’s full residential map, from the older brick homes near downtown to the subdivisions on West Hill and Lea Hill. Crews are dispatched from our Seattle office and typically route Auburn appointments within a few days of booking.
- West Hill
- Lea Hill
- Downtown Auburn
- Lakeland Hills
- North Auburn
Service Area - Cities Near Auburn
Auburn homeowners aren’t the only ones dealing with Green River Valley moisture. We also serve Federal Way, WA, Milton, WA, Kent, WA, and Puyallup, WA with the same camera-scan inspection standard and written upfront pricing.
Serving Auburn, WA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Auburn
Most chimney cleaning and minor crown repair does not require a permit in Auburn, but liner installation and structural rebuilds typically do; we pull permits as needed and include the cost in your written estimate.
We typically schedule Auburn appointments within 3-5 business days during peak season (September-February) and within 1-3 days in slower months; live phone support is available 24/7 to book.
Yes - Auburn’s 7-month heating season means September and October bookings fill first, and wet-season moisture damage is easier to address before daily firing begins; call (253) 323-5667 to reserve a slot.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Auburn Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M.