Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Puyallup: What to Know First

We provide independent Famco chimney liner and rebuild service in Puyallup, with most liner replacements completed in one day and full rebuilds typically scheduled within a week. Every job starts with a camera-scan inspection and ends with a written price you saw before we touched a tool, backed by our 365-Day Done Right Promise. This page is for Famco product owners in Puyallup and nearby South Hill, Sumner, and Bonney Lake who need liner work or masonry rebuild and want to know what it actually costs before a truck rolls.

Call (253) 323-5667

Call (253) 323-5667 for a free estimate. We answer live, 24/7.

How Famco Products Fail - and How We Fix Them

• Famco 304L flexible liner kits in the 6-inch and 8-inch diameters develop pinhole corrosion at the flex points when Puyallup’s wet winters trap condensation against the lower-grade steel. We see this most in homes on South Hill where exterior chimneys run cold. We pull the damaged section, verify the remaining flue with a camera, and replace with 316L or 316Ti alloy through our Haven buying network - a step up in corrosion resistance that Famco’s base kit doesn’t include.
• Famco rigid 304L tee assemblies crack at the weld seam where the tee body meets the snout, especially after thermal cycling from frequent on-off burning patterns common with Puyallup’s mild shoulder seasons. The crack isn’t always visible from the firebox; we find it with the camera looking up from the cleanout. We replace with a heavy-gauge tee, sometimes sourcing from Olympia Chimney when the geometry demands it, and seal with high-temp silicone rated to 2000°F.
• Famco top-mount dampers integrated with chimney caps seize when the cast-aluminum frame corrodes around the stainless cable guide. The damper won’t open fully, which starves the fire and accelerates creosote buildup in the liner below. We remove the assembly, inspect the flue for Class III glazed creosote (the hard, tar-like deposit that chimney fires ignite from), and replace with a Gelco or Copperfield cap-damper combo that uses a stainless cable housing - no aluminum to fail.
• Famco smooth-wall liners in the SL series separate at the coupling joints when the original installer didn’t expand the male end fully into the female socket. The gap leaks flue gases into the chimney cavity, and in Puyallup’s older homes with balloon framing, that CO can travel between floors. We reseat or replace the joint, pressure-test with a smoke pencil, and document the seal with photos under Haven Standard Clause 4.
• Famco firestop and support components compress or pull away from the framing when the original installer used generic hardware instead of Famco’s offset support plate. The liner sags, creating a low spot where condensation pools and rusts the steel from the inside out. We rebuild the support with a proper offset plate or a custom-fabricated support bracket, then rehang the liner to manufacturer pitch specs so water drains back to the appliance, not the cap.

Our Famco Chimney Liner & Rebuild Process

1. 1
   Camera goes in first. We run a Level 2 inspection per NFPA 211, documenting the full flue length with photos and video. Corrine Halstead’s rule: camera goes in first, price gets written down second, work starts third.
2. 2
   We name what we found. The report states liner condition by section, creosote class, masonry integrity, and any gas-leak or CO-risk finding - no euphemisms, no “needs attention” vagueness.
3. 3
   Parts decision with you. If Famco OEM is available and cost-competitive through our network, we quote it. If a DuraFlex or HeatShield equivalent offers better longevity for your burn pattern, we explain the trade-off and let you choose. Written scope, written price, written warranty - Haven Standard Clause 1 - before anyone schedules work.
4. 4
   The repair. Liner jobs get pulled and replaced same day when possible. Rebuilds are staged: tear-down, structural assessment, rebuild, liner install, cap and crown, final camera verification.
5. 5
   Testing and documentation. We smoke-test or pressure-test every joint, run a final camera pass to confirm clear flue and proper liner seating, and deliver your photo record and warranty paperwork before we leave.
6. 6
   The follow-up. We call within 48 hours to confirm satisfaction. If anything’s not right, we return under the 365-Day Done Right Promise - no argument, no re-inspection fee.

Before

After

What Famco Chimney Liner & Rebuild Costs in Puyallup

These are real Puyallup-market prices based on jobs we’ve completed in the South Hill corridor and downtown core. Every estimate is free, written, and valid for 30 days. Bring us a competitor’s written quote - we’ll give you a free second opinion, no obligation.

Why Puyallup Homeowners Call Level Two Chimney Puyallup for Famco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and we’ve learned that Famco products fail in predictable ways when they’re not matched to the right burn pattern or installed with shortcuts. Our techs know the difference between a Famco SL smooth-wall and a standard flex, and they carry DuraFlex, HeatShield, and Gelco alternatives when the original spec doesn’t hold up to Puyallup’s wet winters.

Every technician is background-checked, uniformed, and named before arrival - you’ll get a text when we’re on the way. License information is on every page and every truck. Calls are answered by a live person, 24/7, not a voicemail tree.

We don’t work for Famco. We’re an independent Famco service provider, which means we source parts through our Haven buying network specifically to keep your price honest, not to push OEM at markup. The 365-Day Done Right Promise is stamped on every job, and the photo record from Haven Standard Clause 4 is yours to keep - for insurance, for resale, for your own reference when you need it.

FAQs